Solid state standard capacitors with different nominal voltages nominial capacitance 1000pF nominal voltages 10kV, 30kV, 50kV, 100kV tan delta < 1E-4 built in over voltage protection other voltages and capacitances on request Extra Information Datasheet CS-001N-0030 Datasheet CS-001N-0050 Datasheet CS-001N-0100 Front – Hi-Res (648kB)
Compressed gas standard capacitors with nominal voltages up to 200kV. The depicted 1000pF / 30kV unit, is specifically designed as standard capacitor for medium voltage power capacitor measurements. capacitance 1000pF (30kV) and 100pF (for higher voltages) nominal voltages up to 200kV special nominal voltages on request tan delta < 1E-5 incl. traceable calibration low price Extra Information Datasheet CG-001N-0030 Front – Hi-Res (903kB)
Universal high voltage reference divider. One single unit for all voltages. Saves valuable laboratory space and set-up time. single unit vor all voltages meets IEC 60-2 for AC and DC voltages lighting impulse up to 500kV switching impulse up to 350kV impulse voltage ratio < 1% light. impulse voltage 0.5% front chopped light. imp. 2% Rated Voltages lighting impulse up to 500kV Universal High Voltage Reference Divider for Lighting Impulse Voltage of 500kV lighting impulse voltage 500kV front- chopped lighting impulse voltage 500kV switch impulse voltage 350kV AC voltage 200kVRMS DC voltagge 250kV Measurement Uncertainty according to IEC 60-2 Universal high voltage reference divider. One single unit for all voltages. According to IEC 60-2. light. imp. voltage 0.5% front chopped light. imp. 0.3% switching imp. voltage 0.5% time parameter t1, t2 3% AC voltage 0.5% AC phase 5mrad DC voltage 0.5% Unit Step Response Data partial resp. time < 12ns Universal high voltage reference divider for lighting impulse voltage of 500kV. Partial response time < 12ns experimental resp. time < 15ns partial resp. time < 12ns setting time < 150ns overshoot beta < 10% Impedances and Ratios scale factor with standard attenuator: 6300 Universal high voltage reference divider. One single unit for all voltages high voltage capacitor = 200pF high voltage resistor = 600E scale fac. without att. = 630 scale fac. with stan. att. = 6300 Technical Data About Dividers a technical paper about reference measuring system for lightning and switching impulse voltages.
Products: Power Supply Unit 2kV 19″ Laboratory Power Supply Kilovoltmeter Tan Delta References TG-SIM TG-SIM with built in Standard Capacitor (100pF) TG-UCAL TG-CAL with built in Kilovoltmeter Current Transformers Reference Current Comparator CT-N1K0, CT-N2K0, CT-N5K0 Capacitors Standard Air Capacitors Compressed Gas Capacitors Solid State Capacitors
The tan delta simluator can be matched to any standard capacitor. For that the specified Capacitance values will be needed. uncertainty tan delta >10-4 or 1% of value Extra Information Front – Hi-Res (1060kB)
Calibration standard for tangens delta measurement built-in ultra stable standard capacitor 100 pF / 12 kV easy check of tan delta over a wide range full traceability to international standards rugged construction for field use Extra Information Front – Hi-Res (1379kB)
TG-UCAL Capacitance, Dissipation Factor and Voltage Standard 12kV Build in ultra stable Standard Capacitor 1’000pF tand values: 0.00%, 0.10%, 0.20%, 0.50%, 1.00%, 2.00%, 5.00% removable control unit for capacitance, tand & voltage calibrations with 50Hz or 60Hz very low measuring uncertainty including compartment with all cables easy transportable Extra Information Datasheet Front – Hi-Res (718kB)
PVM – 100 Kilovoltmeter to be connected and calibrated to a capacitive divider. displayed value Upeak / √2 display LED 3 digit resolution 0.1 kV uncertainty ± 1 % max. input voltage 120 V standard range 0 … 100 kV, other voltages on request Extra Information Datasheet Front – Hi-Res (481kB) Back – Hi-Res (133kB)
Our active standard current transformers based on the current comparator principle. With an indicator winding the magnetic flux in the iron core is measured and fed back into the iron core to make the magnetic flux zero. This way we can grant a 10 ppm uncertainty for ratio and phase and this over a very broad working range. The application of our standard current transformers include range extension for capacitance and tand measurements (cable drums or power capacitors), as reference for current transformer measurements as well as calibration and metrology purposes.
Reference current transformer for range extension of capacitance and power factor measurement. transformation ratios 1 : 10 und 1 : 100 working range 1 … 200 % of nominal current uncertainty of transformation ratio ± 0.001 % uncertainty of phase ± 0.05 Min.